Software Reference
87
P/N CLS151164 Rev. B
LabChip GX Touch/GXII Touch User Manual
PerkinElmer, Inc.
•
Assay
- The name of the assay for which the instrument will be
calibrated.
•
Status
- The current step of the operation in progress. For
completed operations, displays the status of the last operation.
•
Step Time Left
- The time remaining until the current step in the
priming/calibration completes.
•
Run Time Left
- The time remaining until the current run in the
priming/calibration completes.
•
Maximum Calib. Time
- The maximum amount of time
remaining until the priming/calibration completes.
Run Status
- Displays the current status of the assay, prime, or
wash that is currently running or about the last completed
operation.
•
Assay
- The name of the assay that is running or that generated
the displayed data.
•
Status
- The current step of the operation in progress. For
completed operations, displays the status of the last operation.
•
Step Time Left
- The time remaining in the current step in the
run.
•
Run Time Left
- The time remaining until the assay is complete.
•
Barcode
- Displays the barcode number if
Use Barcode
is
selected in the
. Displays
N/A
if
Use Barcode
is
not selected in the
.
•
Current Cycle
- Displays <CurrentPlateCycle>/
<TotalPlateCycle>, where CurrentPlateCycle is the number of
the plate cycle currently executing and TotalPlateCycle is the
total number of plate cycles specified in the
.
CurrentPlateCycle displays 0 during the priming and warming
steps before reading the first well. Does not display if only one
cycle is selected.
Plate Diagram
- Displays the wells selected for the run in progress
or the last completed run. Does not display for ProteinEXact chips.
•
Blue wells
- Well has been read.
•
Red exclamation point in wells
- An analysis error has
occurred in the well, such as no lower marker detected.
•
Flashing green/orange
- Well reading is in process.
•
Green
- Well is selected for reading but not read yet.
•
Gray
- Well is not selected to be read.
