Exporting Data
47
P/N CLS151164 Rev. B
LabChip GX Touch/GXII Touch User Manual
PerkinElmer, Inc.
Selecting the Exported Properties in the Well
Table or Peak Table
The properties that are included in the Exported Peak Table or Well
Table files can only be selected after the run is started.
NOTE
The desired properties should be selected during the Warm or Load
step to ensure that all properties are exported for all wells if Single
File is selected.
To change the exported data:
1
Touch the
Tools
button on the
2
Touch the
Export Setup
button to open the
3
To change the Peak Table or Well Table export properties:
a
Touch the
.
b
Move the desired properties into the
exported
list by
selecting the properties and using the Left or Right arrow
buttons to move the properties into the desired list.
4
The changes take effect with the next file that is exported.
Exporting Data in AIA Format for Use in Third-
Party Analysis Software
To export data in AIA format for use in third-party analysis software:
1
Touch the
Tools
button on the
and then touch the
Export Setup
button to open the
2
Touch the
.
3
To export the files to a location other than the data folder, touch
the
Browse
button and select the desired location for the data
files. To reset the location to the default, touch the
Default
button.
4
Select the
Raw Data
check box under
Export Selections
.
5
Select the
AIA Format
check box under
Raw Data Options
.
6
Touch
Save
to save the Export settings.
7
Start the Run (see
).
