Using Sample Names Files
58
P/N CLS151164 Rev. B
LabChip GX Touch/GXII Touch User Manual
PerkinElmer, Inc.
Selecting Wells using a Sample Names File
(Continued)
Figure 13. Selected Wells on Run Window
This Sample Names file cannot be created in the
Sample Names
Editor
window in the LabChip GX Reviewer software because the
files created in the Sample Names Editor window always contain
one row for each well in the plate. The Sample Names files for
selecting wells are typically created by a LIMS or can be created in
Microsoft
®
Excel and are saved as a *.csv file.
To select the wells using a Sample Names file:
1
Create the Sample Names file with one row for each well to be
sampled.
2
Touch the
Home
button and then touch the
Run
button.
3
Select the desired run settings on the
4
Select at least one well in the plate diagram. It does not matter
which well is selected. The
Next
button is not enabled unless at
least one well is selected.
5
Touch the
Next
button
or the
6
Select the
Sample Names file
check box.
7
Touch the
Browse
button next to the Sample Names text box,
select the Sample Names file (*.csv), and touch the
Open
button.
