PerkinElmer LabChip GX Touch, User Manual

Page: 32 / 190

Running an Assay 32
P/N CLS151164 Rev. B LabChip GX Touch/GXII Touch User Manual PerkinElmer, Inc.
Running an Assay
This section includes general instructions for using the LabChip GX
Touch hardware and software to run an assay:
To run an assay:
1 Complete the steps in the Preparing the Instrument to Run
Samples section.
2 Define the parameters of the assay run (see page 33 ).
3 Monitor the run (see page 37 ).
4 If desired, edit the analysis parameters during the run (see
page 38 ).
5 If necessary, stop the run before it completes (see page 39 ) and
continue the stopped run if desired (see page 40 ).
6 Remove the Plate, Buffer Tube, and Ladder Tube (see page 41 ).
7 Unload the chip (see page 41 ). Store the chip according to the
instructions in the Assay User Guide .
8 If necessary, wash the chip (see page 42 ) immediately before
running the chip again.