Cypher SPM
User Guide
Item
Part #
Item Description
Qty
Picture
1
Humidity Cell Body.
1
2
114.916
Boot Clamp Ring, 8 Bolt Pattern. Con-
nects to the bottom of the cell to form
the seal between the cell body and the
sample stage membrane. See
1
3
00-90 x 1/8”
Pan Head
SS
00-90 x 1/8” screw. Spare screws used
to fasten the sample stage membrane
to the cell body. See
8
4
1-72 x 0.25
SHCS SS
1-72 x 1/4” long screw. Used to lock
down the cantilever holder.
2
5
458.257.1
Applications Board. Used to connect
the Humidity sensor to the scanner
electronics.
1
10.3.2 Humidity cell installation
1. Use the coarse adjust wheel on the enclosure to raise the scanner’s tip stage to the top of its
range.
2. Remove the cell/stage assembly that is currently installed in the scanner.
Note:
Refer to
Exchanging the sample stage and cell body on page 84
if you are not familiar
with doing this.
Page 71 of 243
10 Cell Body and Sample Stage Guide
