Cypher SPM
User Guide
8. Secure the objective parts.
l
Place the objective in the round hole in the View
module foam and push it all the way in; the lid
should be flush with the top of the foam.
l
Put the chassis/optics cover and airflow shield in the
View module foam.
Note:
These components were removed along
with the enclosure top cover.
9. Place the motor power supply with the power cord inside the view module foam, parallel to the
view module itself.
10. Put on the top foam; make sure the square hole lines up with the corner where the view mod-
ule piece sticks up.
11. Bag the pass-through board in an anti-static bag (part taken from backpack & chassis) and put
in top hole of foam.
Note:
This component was removed with the backpack.
12. Coil the black FireWire cable in the top and pass it through the board.
13. Close the box and tape it shut.
31.11 Packaging the accessories
Materials
Part# 991.014: Cardboard carton 12" x 12" x 10"
Part# 990.040: Foam (Cypher optics and accessory)
31 Shipping or moving
Page 240 of 243
