Cypher SPM
User Guide
16.4 Installing blueDrive
1. Connect interlock switch to blueDrive board.
l
blueDrive is mounted to the Cypher Chassis when
tested in factory. During shipping, it remains moun-
ted to the Chassis and wired to the Cypher head
board that controls blueDrive.
l
The only hardware installation required, beyond the
typical assembly of the Cypher, is connecting the
blue door interlock switch.
l
As seen in the image to the right, the blue wire con-
nector mounts into the daughter head board from
the back.
2. Attach blueDrive Optics Cover (optional).
l
The blueDrive Optics Cover (901.803) magnetically
attaches to the View Module bridge as shown in the
image to the right.
l
It serves an aesthetic purpose, and therefore is not
required for proper functioning of the Cypher sys-
tem.
16.4.1 Changing filter cubes
The standard blueDrive package comes with five filter cubes (900.266.01-05), labelled by their gain
factor: 0.01x, 0.03x, 0.10x, 0.30x, or 1.00x. The spare filter cubes dock on the Cypher door when
they are not in use.
Page 127 of 243
16 blueDrive photothermal excitation
