Cypher SPM
User Guide
18. Tighten the cantilever holder.
l
Use the ball headed wrench to gently tighten the
screw that clamps the cantilever holder.
l
Don't use your whole hand! Be gentle!
19. Secure scanner in place.
l
Gently slide the scanner back into the chassis.
l
Push the lever at the right of the scanner downward
to secure the scanner in place.
20. Check correction collar.
l
Check that the green correction collar on the object-
ive is set to zero.
l
This cantilever holder has no glass window through
which the light must focus.
21. Close the enclosure door and latch it.
Page 204 of 243
30 Workflows
