Omron CS1W-SLK11-21 - 06-2004, Manual

Page: 43 / 202

26
Cable Connections Section 2-4
Note The Optical Fiber Cable model numbers are as follows:
Connectors
Note (1) Production of S3200-COCF2011 (full-lock) and S3200-COCF2511 (half-
lock) Connectors has been stopped. Use the above Connectors as re-
placements.
(2) Either full-lock or half-lock connectors can be used in a SYSMAC LINK
Network, but we recommend full-lock connectors to prevent accidental
disconnections during operation.
(3) The maximum distance between nodes is slightly shorter for connectors
with crimp-cut cables compared to connectors assembled with adhesive.
Also, the maximum distance is reduced due to extension loss when Inline
Adapters are used to extend cables.
Optical Fiber Cable with
Connectors The following adhesive-polished Optical Fiber Cables are available with Con-
nectors already attached.
S3200-H
(((((((
Tensioner option
None: Standard (with tension member)
N:
Without tension member
Cable length
(((
A B
(A/10) x 10
B
m
Cable color
B:
Black
O: Orange
Cable specification
L:
With power supply line
C: Without power supply line
Type
B:
Cord
C: Cable
Name Model Specifications
Connector S3200-COCF2071
(See note 1.) Use to connect a cable to a node.
(Full-lock connector for crimp-cut cable.)
S3200-COCF2571
(See note 1.) Use to connect a cable to a node.
(Half-lock connector for crimp-cut cable.)
Inline Adapter S3200-COIAT2000 Use to connect or extend cables.
(Use one adapter for each connection.)
Specifications Length Model
Optical Fiber Cable Connectors:
S3200-COCF2011
ß
S3200-COCF2011
2 m S3200-CN201-20-20
5 m S3200-CN501-20-20
10 m S3200-CN102-20-20
15 m S3200-CN152-20-20
20 m S3200-CN202-20-20
Over 20 m S3200-CN-20-20
(Specify length (m) when ordering.)