Omron CS1W-SLK11-21 - 06-2004, Manual

Page: 128 / 202

111
FINS Command/Response Format Section 6-3
6-3-5 FINS Commands for SYSMAC LINK Units
Note These commands can also be sent to the PLC.
6-3-6 Response Codes
A response code consists of two bytes. If a command is completed normally, a
response code of 00 00 will be returned. The first two digits of a response
code are called the main response code (MRES) and the last two digits are
called the sub-response code (SRES). If command execution results in an
error, one of the response codes listed in the following table will be returned.
Refer to
8-1-2 Probable Causes and Remedies of Response Code Errors
for
details.
Command
code
Name Page
04 01 DATA LINK START (see note) 112
02 DATA LINK HALT (see note) 112
03 RESET 112
05 01 CONTROLLER DATA READ (see note) 113
06 01 CONTROLLER STATUS READ (see note) 113
02 NETWORK STATUS READ 115
03 DATA LINK STATUS READ 117
08 01 INTERNODE ECHO TEST 118
02 BROADCAST TEST RESULTS READ 119
03 BROADCAST TEST DATA SEND 119
21 02 ERROR LOG READ (see note) 120
03 ERROR LOG CLEAR (see note) 121
MRES Description
00 Normal completion
01 Local node error
02 Destination node error
03 Controller error
04 Not executable
05 Routing error
10 Command format error
11 Parameter error
20 Read not possible
21 Write not possible
22 Not executable in current PLC mode
23 No Unit
24 Start/Stop not possible
25 Unit error
26 Command error
30 Access right error