![background image](http://html1.mh-extra.com/html/omron/cs1w-slk11-21-06-2004/cs1w-slk11-21-06-2004_manual_743560093.webp)
76
CX-Programmer Procedures
Section 4-12
• The send area sizes will be the same for all nodes participating in the data
links.
• The send node order will be in the order of node addresses
• There will be no nodes that do not receive.
Setting Example
The following example shows the Data Link Table Engineer settings.
1,2,3...
1.
Select
Table
and then
Data Link Engineer
. The Data Link Table Engineer
dialog box will be displayed, as shown below.
2.
Make the following settings.
• In the Valid Nodes Field, enter the node addresses for the automatic
settings.
• In the Common Link Parameters Field, set the send size for each node
in the CIO Area and in the DM Area. All nodes must have the same
send sizes.
• Set the PLC type in the PLC Type Field under
Refresh Parameters
. Se-
lect “CV/CVM1.”
• In the Start Channel Field, set the first words in the CIO Area and DM
Area data links.
Area 1
Node 1
Node 2
Node 3
Send (1)
Receive
(2)
Receive
(3)
Receive
(1)
Send (2)
Receive
(3)
Receive
(1)
Receive
(2)
Send (3)
Area 2
Node 1
Node 2
Node 3
Send (1)
Receive
(2)
Receive
(3)
Receive
(1)
Send (2)
Receive
(3)
Receive
(1)
Receive
(2)
Send (3)
Summary of Contents for CS1W-SLK11-21 - 06-2004
