125
Remote Programming and Monitoring
Section 7-1
7-1-3
Remote Programming and Monitoring Different Networks
You can program and monitor CPU Units on different networks (Ethernet,
SYSMAC NET, and Controller Link) from a CX-Programmer connected to a
CS-series, CVM1/CV-series, or C200HX/HG/HE-series CPU Unit. CS-series,
CVM1, and CV-series PLCs must be used as the bridges between the net-
works.
Note
When performing remote programming or monitoring from CX-Programmer
over a SYSMAC LINK Network, set the frame length to a maximum of 542
bytes using the network settings of the PLC connected to CX-Programmer. If
the frame length is set to 543 bytes or over, the user program and other data
cannot be transferred.
CX-Programmer
Programming Device
SYSMAC LINK Network
Controller Link Network,
Ethernet Network, etc.
CS1
Programming/
Monitoring
CX-Programmer
SYSMAC LINK
Controller Link,
Ethernet, etc.
C200HX/HG/HE
CVM1 or
CV-series PLC
Note
Remote programming and monitoring is possible from computer nodes.
CS-series, CVM1, CV-series, or
C200HX/HG/HE-series PLC
CS-series PLC
CS, CVM1, or
CV-series PLC
Summary of Contents for CS1W-SLK11-21 - 06-2004
