Oki MC780f User Manual Download Page 44

Page: 44 / 380

4.[Logs] Tab Page

[Logs] Tab Page Overview 43

4 [Logs] Tab Page

Message Log <access policy mode>

The Message Log page displays errors which have occurred.

Displays only when you are logged in with a user account which is granted administrator privileges or display
privilege in the access policy mode.

The default Administrator and Auditor roles can check all message logs. For more information on default roles and
privileges, see the following:

P.123 “Default roles and privileges”

For details on error codes and error messages, refer to “Checking the Equipment Status with TopAccess” in the

User’s

Manual Troubleshooting Guide

Item name

Description

Date Time

Displays the date and time of the error.

Error Level

Displays the error level.

Error

— Error that user and administrator may not be recoverable.

Warning

— Error that administrator is recoverable.

Information

— Error that end user is recoverable or that event is not error.

Message

Displays the message if available.

Status

Displays the error code.

User Name

Displays the user account name related to the message.

Domain Name/LDAP Server

Displays the domain name or LDAP server of the user account related to the message.

Summary of Contents for MC780f





























































































































































































































































































































































































Search results

Summary of Contents for MC780f

Reviews:

Related manuals for MC780f

Brands by name

Popular brands

Oki MC780f, User Manual

Search results

Summary of Contents for MC780f

Reviews:

Related manuals for MC780f

Brands by name

Popular brands