Oki MC780f, User Manual

Page: 374 / 380

11.APPENDIX
Installing Certificates for a Client PC 373
11 APPENDIX
9
Click the [Details] tab and select [Thumbprint] to check the 40-digit thumbprint.
10
Open the command prompt and execute the “netsh” command as shown below.
If you log in to Windows Vista as a user without the administrator privilege, open the command prompt by right-
clicking the icon and selecting [Run as administrator.] This way, you can temporarily have the administrator
privilege to execute the command.
- Using the thumbprint obtained in Step 9, type the following command:
netsh http add sslcert ipport=0.0.0.0:5358 certhash=(your 40-digit thumbprint) appid={00112233-4455-
6677-8899-AABBCCDDEEFF}
- When inputting the thumbprint, exclude the spaces.
When your client certificate is created with Certificate Revocation List (CRL), you need to check if the CA server
is accessible by FQDN (see the following figure).
If no FQDN connection is established, ask your administrator to perform either of the following options:
-
In the “hosts” file accessible from the following folder path, add the IP address and the host name:
C:\WINNT\system32\drivers\etc
- Configure the DNS server to handle the name-to-address resolution.