Oki MC780f User Manual Download Page 62

Page: 62 / 380

5.[Registration] Tab Page

[Registration] Tab Page Overview 61

5 [Registration] Tab Page

Selecting the groups from the address book

You can select groups from the address book.

You cannot select destinations from the address group if [Restriction Setting for Destination] is enabled.

P.263 “Restriction Setting for Destination”

Click [Destination Setting] to open the Recipient List page.

Click [Address Group].

The Address Group page is displayed.

Select the [Group] check boxes that contain the desired destinations.

Click [Add].

All recipients in the selected groups are added to the Recipient List page.

You can remove the destinations you added to the Recipient List before saving the destination settings.

P.63 “Removing the contacts from the Recipient List”

Click [Save].

The contacts are added as destinations.

Summary of Contents for MC780f





























































































































































































































































































































































































Search results

Summary of Contents for MC780f

Reviews:

Related manuals for MC780f

Brands by name

Popular brands

Oki MC780f, User Manual

Search results

Summary of Contents for MC780f

Reviews:

Related manuals for MC780f

Brands by name

Popular brands