Oki MC780f, User Manual

Page: 168 / 380

8.[Administration] Tab Page
[Setup] Item List 167
8 [Administration] Tab Page
[Create SNMP V3 User Information] screen
You can display this screen by clicking the [New] button in the Create SNMP V3 User Information page.
Clicking [Save] on the [Create SNMP V3 User Information] screen instantly registers the SNMP V3 user information,
enabling the registered user to access this equipment via SNMP over a network.
1
2
3
4
5
6
7
Item name Description
1 Context Name Displays the context name.
2 User Name Enter the user name. You can enter up to 31 alphanumerical characters and symbols.
3 Authentication Protocol Select an authentication protocol.
y HMAC-MD5 — Select this to use HMAC-MD5.
y HMAC-SHA — Select this to use HMAC-SHA.
4 Authentication Password Enter the password when the Authentication option is enabled. You can enter up to 31
characters.
5 Privacy Protocol Select a protocol for data encryption.
y None — Select this not to encrypt data.
y CBC-DES — Select this to use CBC-DES.
y CFB-AES-128 — Select this to use AES-128 (CFB mode).
6 Privacy Password Enter the password for the user information. You can enter up to 31 alphanumerical
characters and symbols.
7 Permissions Level Select the access permission level of the SNMP V3 user.
y General User — Select this to permit only the reading of data.
y Administrator — Select this to permit both the reading and writing of data.