NTT docomo FOMA N700?, Manual

Page: 573 / 597

570
Appendix
Memory dial (Phonebook function) and Downloaded information
● Information you stored in your mobile phone should be kept separately in a notebook. Under no circumstances shall NTT
DoCoMo be held liable for any loss of or damage to the stored data in your FOMA terminal.
● In the course of repairs to or model change of your mobile phone, data, such as downloaded data (data created by the
user or data imported from external sources) may be modified or lost. Furthermore, DoCoMo may conduct repairs that
entail replacing your mobile phone with an equivalent product, in which event it is not possible to transfer such data in its
entirety to the replacement product. DoCoMo accepts no liability whatsoever in the event of this.
<Software update>
Software Update
Check whether software in the FOMA terminal needs to be updated; if necessary, and then download part of the
software by using packet communication and update the software.
If software update is required, you will be notified of the guidance in the DoCoMo’s web page or “
お知らせ &ヘル
プ ” (News & Help) in iMenu.
●
The packet communication to update the software will not be charged.
● There are 2 ways to update software as follows:
Now update
: Perform update immediately as you want to update the software.
Reserved update : Set the date and time you want to perform update, then the software will be downloaded and
updated automatically on the specified date and time.
● You can perform software update even when users are set as the destination of i-mode connection.
● Note that it may take some time to perform software update (download or rewrite).
● SSL communication with the server (the server for software updating administered by DoCoMo) is performed upon
software update. Enable the certificate in advance. (Default: Enable; setting procedure
→ P. 235)
● You must completely charge the battery pack before updating software.
● It is recommended that you update the software in a location with strong radio wave reception (the reception level
indicator shows 3 bars) while stationary state.
* If radio waves get weak while downloading or if the downloading is discontinued for some reason, make another
attempt to update the software in a location where radio waves are favorable.
● If “PIN1 code setting” is set to “ON” and you run the software update, the PIN1 code entry screen is displayed after
automatically restarting. If you don’t enter a correct PIN1 code, you cannot receive phone calls or mail.
● You cannot update software:
■ IMPORTANT!
●
Never attempt to modify the FOMA terminal or its accessories.
・ Doing so may result in fire, injury or malfunction.
・ The technical standards of the FOMA terminals and FOMA cards are strictly controlled by law to avoid potential network malfunctions and cross
talks. The use of the FOMA terminals and FOMA cards that do not meet these technical standards is not permitted.
・
If your FOMA terminal has been modified previously (replacement of parts, modification, coating, etc.), it will only be accepted for the repair of a
malfunction if it has been restored to its original state (as a standard DoCoMo product). However, repair may be refused depending on the extent
of the modification.
・ The user will be charged for the repair of any malfunction or damage caused by such modifications even during the warranty period.
●
Never peal off the seal or the model name plate attached to the FOMA terminal.
The seal or plate functions as a certification that the equipment conforms to the prescribed technical standards. If the seal or the plate is removed or
replaced, repair may be refused because conformity to the standards cannot be determined.
● Note that the information stored in your FOMA terminal, such as settings of various functions and the total call time, may be cleared (reset) if your
FOMA terminal is damaged, repaired or otherwise mishandled. If this happens, please re-enter the information or re-specify the settings.
● The FOMA terminal incorporates a magnetic element in the following parts. Prevent a bankcard, etc. from being close to the earpiece speaker since
it may be damaged.
Location used: Neuropointer key, speaker, earpiece speaker
●
If your FOMA terminal gets wet or moist, you must immediately turn it off, remove the battery pack, bring the FOMA terminal to a repair shop as
soon as possible. However, the FOMA terminal may not be able to be repaired depending on its state.
･
When FOMA card (UIM) is not inserted
･ Incorrect usage of FOMA card (UIM)
･ When PIN is locked
･ When PUK code is locked
･
When date and time is not set
･ While there is an incoming call
･ While receiving mail/SMS/message
･
During a call
･
During video-phone call
･ During i-mode connection
･
During 64K data communication
･ During packet communication
･ During all lock
･ When PIM lock is on
･
When self mode is on
･ Out of service area
･ When packet dialing is locked
･
While using mova terminal with dual network service
･
When miniSD reader/writer function works
･ While other functions are running