NTT docomo FOMA N700?, Manual

Page: 136 / 597

133
Tone
/Di
spl
ay
/L
ig
htin
g S
etti
n
g
s
Continued on next page
Adjusting the pointer movement speed
In the neuropointer display...
a
P. 132
1
Press
2
“Speed”
s
Choose from the following options:
*: This setting may be not applicable depending on an i-
α
ppli software.
<Illumination>
Setting the Call Alert Indicator Flashing Mode for Incoming Calls
Default settings Phone: Color 5 Video-phone: Color 5 Mail: Color 1 Chat mail: Color 3
Message Request: Color 1 Message Free: Color 1
Set pattern: Standard Color name: Color 1-12
Use this procedure to set the color and pattern (flashing pattern) in which the call alert indicator flashes when you
receive voice or video-phone calls, mail, chat mail and Message Request/Free.
● You can set different flashing colors respectively for incoming calls and messages from specific phone numbers, e-mail
addresses and groups.
→ P. 107
● The way
o
and
p
flash has the same setting as the incoming call lamp, but orange is the only color you can use.
1
Press
i89
s
Choose from the following options:
2
Speed See “Adjusting the pointer movement speed” → P. 133
3
Slide
s
Choose from the following options:
Sets the slide.
1
Adjust
s
Select “YES” and press
d
s
Slide your finger over the
neuropointer key as instructed by the on-screen guidance.
2
Reset
s
Select “YES” and press
d
.
1
Simple
s
Selects
1
“Normal” or
2
“High”
s
Select “YES” and press
d
.
Chooses from 2 speed settings.
2
Detail
s
Choose from the following options:
Sets the speed settings for each display.
1
Standard
s
Use
c
to select “Initial speed area”, “Low speed area” or
“High speed area”
s
Use
v
to adjust the speed
s
Select
“OK” and press
d
.
The speed can be adjusted from level 0 (left end) to level 11 (right end). Move
the key to the right to increase the speed and to the left to decrease the speed.
2
MainMenu
3
T9/Prediction
4
Software*
3
Reset
s
Select “YES” and press
d
.
1
Set color
s
Choose from the following options:
Selects the color for the call alert indicator.
The selected color appears on the display during selection.
1
Phone
s
Select a color and press
d
.
Selects the flashing color respectively.
Color 1 to 12: Each color blinks.
Gradation: The color 1 to 12 blinks in order.
2
Video-phone
3
Mail
4
Chat mail
5
Message Request
6
Message Free