NTT docomo FOMA N700?, Manual

Page: 511 / 597

508
D
at
a Co
mm
u
n
icatio
n
AT Command List
AT commands available on FOMA terminal
● The following abbreviations are used in the AT command list;
[&F]
: Command of which setting is initialized by AT&F command.
[&W] : Command of which setting is saved by AT&W command. The setting can be retrieved by using ATZ
command.
Modem port command list
The following are the usable commands for FOMA N700i (modem):
AT command Outline Description of parameters
Command execution
example
A/ Execute the last executed command
again. No carriage return is
necessary. — A/
OK
AT — The modem function of a FOMA terminal is
controllable by adding the command of this table
after this command.
* OK is answered even when only AT is
entered.
AT
OK
AT%V Display the version of the FOMA
terminal. — AT%V
Ver1.00
OK
AT&Cn
[ &F] [ &W]
Select the operating condition of the
circuit CD signal to DTE. n=0 : CD is always ON.
n=1 : CD changes according to the carrier of
the other party’s modem (initial value).
AT&C1
OK
AT&Dn
[ &F] [ &W]
Select the operation to take place
when the circuit ER signal received
from DTE transits between ON and
OFF. n=0 : Ignore ER status (always assumed to be
ON).
n=1 : When ER changes from ON to OFF, it
becomes an online command status.
n=2 : If ER changes from ON to OFF, a
connection is disconnected and it will be
in an off-line command status (initial
value).
AT&D1
OK
AT&En Select how to display the connection
speed. n=0 : Displays the wireless network
transmission speed.
n=1 : Displays the DTE serial transmission
speed (default).
AT&E0
OK
AT&Fn Restore all of registers to their
defaults. If this command is input
during communication, the circuit will
be disconnected. Only n=0 can be specified (optional). In on-line command mode
AT&F
NO CARRIER
(Change to off-line
command mode)
In offline command mode
AT&F
OK
AT&F?
ERROR
AT&F=?
ERROR
AT&Sn
[&F] [&W]
Set the Data Set Ready signal to be
output to DTE. n=0 : DR is always ON (initial value).
n=1 : DR signal is ON when the line is
connected (when the communication call
is established).
AT&S0
OK