NTT docomo FOMA N700?, Manual

Page: 545 / 597

542
Ent
eri
ng
T
ext
Pasting text
Once you have cut or copied text, you can paste that text as many times as you like until you cut or copy other text or
turn the FOMA terminal off.
In the text entry (edit) display function menu...
a
P. 536
1
Press
6
“Paste”.
■ If the text to be pasted includes characters that cannot be entered in the intended Text Entry
(Edit) display
A message appears notifying you that the characters will be replaced by spaces when the text is pasted.
Entering Kuten Codes
This function provides a way of entering kanji, hiragana, katakana, symbols and alphanumeric characters using 4-
digit “kuten” codes.
● About Kuten code and characters that can be entered by using kuten code → P. 552
● The display of a screen may differ from the character of a Kuten code or a symbol.
<Example: Entering “
慶
” (kuten code 2336)>
In the text entry (edit) display...
a
P. 522
1
Press
w
.
The input mode changes to “Kuten code” input and “ ” appears in the information
display area.
■
When the text entry mode is Mode 3 (T9 input)
In the Text Entry (Edit) display Function menu
s
Press
j s
Press
5
“Kuten code”.
2
Enter kuten code
2336
.
The character for the entered code appears and the FOMA terminal reverts to the original input mode.
■ If there is no corresponding character for the entered kuten code
A space is entered.
Note
● If the pasted characters exceed the limit on the number of characters that can be entered, a message appears saying that the limit has been
exceeded. If you select “YES”, the text is pasted and the excess text from the end of the pasted text onwards is truncated. If you select “NO”, the text
is not pasted and the original display reappears.
５１２
Ｅｄｉｔ ｍｅｍｏｒａｎｄｕｍｓ
Ｓｅｔ
6
Ｅｄｉｔ ｍｅｍｏｒａｎｄｕｍｓ
２３ ３
Ｓｅｔ
５１０
Ｓｅｔ ＦＵＮＣ Ｍｏｄｅ
Ｅｄｉｔ ｍｅｍｏｒａｎｄｕｍｓ
慶
５１２