NTT docomo FOMA N700?, Manual

Page: 484 / 597

481
Continued on next page
D
at
a Co
mm
u
n
icatio
n
About the FOMA PC Setting Software
By using the FOMA PC setting software, you can easily set
up the following:
● You can also set up packet communication and 64K data
communication without using the FOMA PC setting
software.
→ P. 493
● The “FOMA PC setting software” will not operate if the
FOMA terminal’s modem port has been recognized as a
number greater than COM20.
Easy settings
The guide walks you through the procedures for “Making a new
dial-up connection for FOMA data communication” and “W-
TCP setting”.
W-TCP setting
W-TCP settings optimize the communication settings of a PC
before using “FOMA packet communication”.
To get the most out of communication performance, it is
necessary to optimize communication settings by making W-
TCP setting.
Access point name (APN) setting
Set the access point name (APN) required for packet
communication.
Unlike 64K data communication, a phone number is not used
for FOMA packet communication access point. Before you
connect, register the APN (Access Point Name) of each
access point in the FOMA terminal and assign its registration
number (cid) to the connection point phone number field. For
using mopera, APN: mopera.ne.jp is registered as the first cid,
but when connecting to other providers or corporate LAN, you
will need to make the APN settings.
cid [Context Identifier]: a number corresponding to a packet
communication connection point (APN). It is set when
registering the APN in the FOMA terminal.
Installing the FOMA PC Setting Software
●
Check operating environment prior to install the FOMA PC
setting software.
→ P. 475
● When installing the “FOMA PC setting software” on a
Windows 2000/Windows XP machine, be sure to log on as
Administrator.
● For information about setting the Administrator privilege,
contact the manufacturer of your PC or Microsoft.
1
Insert the supplied CD-ROM in the CD-
ROM drive of the PC and click
“
FOMA PC設定ソフトのインス
トール
” (Installation of the FOMA PC
setting software).
The “ FOMA N700i ご利用にあたって ” (To
use FOMA 700i) screen will automatically be
displayed. If for some reason the CD-ROM is not
automatically started, right-click the CD-ROM icon in
“
マイコンピュータ ” (My Computer), select “ 開く ”
(Open) and double-click “start.exe”.
Then click “
FOMA PC 設定ソフトのインス
トール ” (Installation of the FOMA PC setting
software).
2
Click “
次へ
” (Next).
Before starting the setup process, make sure that no
other program is currently running or resident. If there is
any program running, click “
キャンセル ” (Cancel) and
exit the program and resume installation.
If a message appears indicating that “previous W-
TCP setting software” or “previous APN setting
software” is installed, proceed to P. 482.
3 Upon confirming the user agreement
of “
FOMA PC設定ソフト ”
(FOMA PC setting software), click “ は
い ” (Yes) to agree to it.
If you click “ いいえ ” (No), the installation is
canceled.
For connecting the FOMA terminal
to a PC, see P.475.