NTT docomo FOMA N700?, Manual

Page: 470 / 597

467
Continued on next page
Netw
o
rk Ser
vices
●
This service only operates when the caller has
deliberately withheld his or her caller ID using the “User
unset” reason setting. Calls where the reason is
“Payphone” or “Not supported” are not intercepted by
this service.
●
There is no charge for activating or deactivating the
Caller ID request service.
● Call charges while the message is sent to the caller are
paid by the caller.
●
If the Caller ID request service is set at the same time
as “Voice mail”, “Call forwarding”, “Call waiting” service
or “Driving mode”, the Caller ID request service has
precedence and intercepts incoming calls.
● If the Caller ID request service is set at the same time
as “Nuisance call barring” service, “Nuisance call
barring” service has precedence and rejects received
calls.
●
If the Caller ID request service is set at the same time
as “Call setting w/o ID” (P. 155), the Caller ID request
service has precedence.
●
Calls rejected by the Caller ID request service are not
logged in the “Received calls” record and no “Missed
call” desktop icon is displayed.
Activating the Caller ID Request Service
1 Press
i s
Select and press
d s
Press
7
“Caller ID request”
s
Press
1
“Activate”
s
Select
“YES” and press
d s
Press
d
.
■ To deactivate the Caller ID request service
Press
2
“Deactivate”
s
Select “YES” and
press
d s
Press
d
.
■ To check your Caller ID request service
settings
Press
3
“Status request”.
Dual Network Service (Paid)
Subscription required Yes
The Dual network service allows a FOMA terminal, with its
advanced communications services, and a mova terminal,
which offers an extremely extensive service area, to each
use the same phone number.
●
You cannot use the Dual network service when is
displayed.
● For detailed information on the Dual network service
and how to access the service from a mova terminal,
refer to the “Network Services Operation Guide”.
About the Dual Network Service
● The Dual network service can be switched either from a
FOMA terminal or from the mova terminal when it is
unable to use services.
● You cannot access the network from both the FOMA
terminal and the mova terminal at the same time.
Switching from a mova terminal to a FOMA terminal
1 Press
i s
Select and press
d
s
Press
j s
Press
1
“Dual
network”
s
Press
1
“Dual network
switching”.
2
Select “YES” and press
d s
Enter
your Network security code and press
d
.
About network security code
→
P. 142
■ Checking whether the FOMA terminal can
be used
Press
2
“Status request”
s
Press
d
.
Note
● The caller ID request message is not sent to callers in the
following situations:
・ When the caller ID request message cannot be displayed, such
as calls from an NTT payphone or from overseas.
・ When the caller is using the “Call count display service” or
“Charge meter”, or using 64K data communication, the call is
connected without the caller ID request message being sent.
・ Video-phone calls are connected without the caller ID request
message being sent and the “Connection failed” message
appears on the caller’s terminal.
Ａｃｔｉｖａｔｅ
Ｄｅａｃｔｉｖａｔｅ
Ｓｔａｔｕｓ ｒｅｑｕｅｓｔ
Ｃａｌｌｅｒ ＩＤ ｒｅｑｕｅｓｔ
Same phone
number
* Some services are not available.
・
Switching the Dual Network Service
from the FOMA terminal switches to the
FOMA network.
・ Switching the Dual Network Service
from the mova terminal switches to the
mova network.
FOMA network mova network*
FOMA terminal mova terminal
Ｄｕａｌ ｎｅｔｗｏｒｋ ｓｗｉｔｃｈｉｎｇ
Ｓｔａｔｕｓ ｒｅｑｕｅｓｔ
Ｄｕａｌ ｎｅｔｗｏｒｋ