NTT docomo FOMA N700?, Manual

Page: 489 / 597

486
D
at
a Co
mm
u
n
icatio
n
4
Enter the access point name in “
接続
名
” (Connection name), select modem
and click “
次へ
” (Next).
The “ 64K データ通信設定 ” (64K data
communication setting) screen appears.
You can specify the name of the access point.
Enter a name easy to recognize in the “
接続名 ”
(Connection Name) column.
Enter the connection name correctly including upper/
lower case.
The following reserved characters cannot be entered
for Connection Name;
¥ / :
＊
? ! < > |” (half-pitch only)
When using the FOMA USB cable (optional), confirm
that “
モデムの選択 ” (Select Modem) is set to
“FOMA N700i”.
5 Specify the “ ユーザー名 ” (User
name) and “ パスワード ” (Password)
and click “ 次へ ” (Next).
User name and password can be omitted for the
mopera connection.
Select the user for Windows 2000 and Windows XP.
If you are not sure which user to select, choose “
すべ
てのユーザー ”(All users) (default setting).
When setting the user name and password, input the
correct, case-sensitive data provided by the service
provider.
6
Check the setting information and “
完
了
” (Finish).
The contents that were set will be listed. Make sure
that all settings are correct.
Checking “
デスクトップにダイヤルアップの
ショートカットを作成する ” (Add dial-up
shortcut on desktop) automatically creates a shortcut
icon.
To change any setting, click “
戻る ” (Back).
7
Click “OK”.
The communication setup is carried out on the next
step.
→
P. 488
Easy settings: “Specifying 64K communication
settings using other providers”
1 Click “ かんたん設定 ” (Easy
settings).
2 Select “ 64K データ通信 ” (64K
data communication) and click
“ 次へ ” (Next).
3 Select “ その他 ” (Other) and click “ 次
へ ” (Next).
（
Windows 2000
、
Windows XP
）