Nikon D300 Complete Manual Download Page 312

Page: 312 / 769

V1.02

Thom Hogan’s Complete Guide to the Nikon D300

Page 312

button to select it.

To turn

Active D-Lighting

off, repeat the above and select

Off

in Step 4.

Some important things to note when using

Active D-

Lighting

•

It was designed to work with matrix metering.

If you

switch to another metering type, you get variable results.

•

The camera never tells you when it is and isn’t active.

Other than looking in the SHOOTING menu, you can’t
tell whether you’ve set

Active D-Lighting

or not, and you

can’t tell whether it’s active or not (see first bullet).

•

It doesn’t change the exposure in Manual exposure mode.

Active D-Lighting

only changes the zero point in the

metering bar in Manual exposure mode.

•

Some Picture Control settings are canceled.

Any

Brightness

Contrast

setting is overridden by

Active

D-Lighting

•

Automatic ISO and exposure compensation settings still
apply, if set.

You can get really confused if you start

setting multiple things that influence exposure
simultaneously. If you don’t believe me, set the camera to
Manual exposure mode, then turn on

ISO sensitivity

auto control

, dial in an exposure compensation, and set

Active D-Lighting

; try to figure out what’s changing the

exposure and by how much in that situation.

•

The

Active D-Lighting

function is designed to work on

high contrast scenes.

If you use it on a low contrast scene,

Summary of Contents for D300


































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D300

Reviews:

Related manuals for D300

Brands by name

Popular brands

Nikon D300, Complete Manual

Search results

Summary of Contents for D300

Reviews:

Related manuals for D300

Brands by name

Popular brands