Nikon D300 Complete Manual Download

Page: 749 / 769

V1.02

Thom Hogan’s Complete Guide to the Nikon D300

Page 749

Television Playback

Before connecting the D300 to a television via the standard
video out connector, you must tell the camera what kind of
video standard to use:

NTSC

The video standard in the US, Canada, and Japan.

PAL

The standard in the UK and many European countries.

To set the camera’s video standard and connect it to a

television:

Press the

button to display the menu system.

Use the Direction pad to navigate to the SETUP menu
(yellow wrench icon) and then the

key on the

direction pad to select it.

Use the Direction pad to navigate to

Video mode

and then the

key on the Direction pad to select it.

The video connection (top connector, labeled

Video Out

just below the connector)

is on the left

side of the camera (and interferes with holding the
camera when connected to a television). Nikon
supplies a short video cable with the camera.

The D300 also has an HDMI connector under this
same cover, which can be used to connect to HD
televisions and monitors.

Summary of Contents for D300


































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D300

Reviews:

Related manuals for D300

Brands by name

Popular brands

Nikon D300, Complete Manual

Search results

Summary of Contents for D300

Reviews:

Related manuals for D300

Brands by name

Popular brands