V1.02
Thom Hogan’s Complete Guide to the Nikon D300
Page 95
c.
Set Custom Setting #D10 to the type of AA
batteries you’re using. (I recommend using
NiMH rechargeable batteries of at least
2000mAh.)
5.
If you wish to use a EN-EL3e battery in the MB-D10:
a.
Place the EN-EL3e battery into the MS-D10EN
tray in the orientation etched on the tray.
(To remove the battery from the tray later, push
down on the black bar etched with the word
PUSH
and lift up the battery.)
b.
Push the battery tray back into the MB-D10.
6.
If you wish to use an EN-EL4 or EN-EL4a battery in the
MB-D10:
a.
Clip the optional BL-3 battery chamber door
onto the battery.
b.
Push the battery into the camera.
7.
Close the battery compartment door on the MB-D10,
turn the Battery Door Latch handle clockwise, then
fold the Battery Door Latch handle back against the
MB-D10.
8.
Set Custom Setting #D11 to tell the camera whether to
use the battery in the normal battery chamber or the
MB-D10 battery(s) first. Normally, you want the
camera to use the MB-D10 battery first, as it is the
only one that’s easily accessible with the MB-D10
mounted on the camera.
