Nikon D300 Complete Manual Download Page 333

Page: 333 / 769

V1.02

Thom Hogan’s Complete Guide to the Nikon D300

Page 333

what the video pros do: buy a pre-made set from

http://www.warmcards.com

Note: White Balance settings are maintained when the camera is

turned off and turned back on.

You can also bracket the white balance settings on the D300:

Make sure that

Image quality

isn’t set to NEF (white

balance bracketing only functions for JPEG images).

Set Custom Setting #E5 to

WB bracketing

. (See

“Exposure Bracketing Method” on page <567>).

Hold down the

button while rotating the Rear

Command dial until

appears in the top LCD. When

this icon is displayed, white balance bracketing is
active.

Tell the camera how many pictures by holding down
the

button and rotating the Rear Command dial,

and at what white balance intervals by holding down
the

button and rotating the Front Command dial

until the top LCD displays your selection (see “D300
White Balance Bracketing Values Table,” below).

Turning white balance bracketing OFF is easy: simply

repeat Step 3, above, but rotate the Rear Command dial until

no longer appears.

D300 White Balance Bracketing Values Table

Display

# of Shots

Exposures

3F 1

0, -5, +5 MIRED

3F 2

0, -10, +10 MIRED

3F 3

0, -15, +15 MIRED

5F 1

0, -5, -10, +5, +10 MIRED

Summary of Contents for D300


































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D300

Reviews:

Related manuals for D300

Brands by name

Popular brands

Nikon D300, Complete Manual

Search results

Summary of Contents for D300

Reviews:

Related manuals for D300

Brands by name

Popular brands