NEC UX5000 Manual Download

Page: 108 / 588

Call Routing Mailbox

◆

Chapter 2: Features

UX Mail Manual

✔

See the following chart for default settings.

Step 5

To change how long an Automated Attendant screened transfer (TRF) will ring an extension:

5.1

USTOMIZE

: M

AILBOX

PTIONS

DIT

: C

ALL

OUTING

: [C

- Enter a new ringing interval (0-255).

✔

By default, this setting is 3 (about 15 seconds).

Step 6

To set up the Call Routing Mailbox for use with Directory Dialing:

6.1

FOR

MORE

6.2

USTOMIZE

: M

AILBOX

PTIONS

DIT

: C

ALL

OUTING

: [C

- Specify which Directory List (1-100,

for All,

for None) the Call Routing Mailbox

should use for Directory Dialing.

✔

By default, the Call Routing Mailbox uses all lists (

Step 7

To shut off the default Welcome Message and the Instruction Menu for this Call Routing
Mailbox:

7.1

See

for more.

7.2

USTOMIZE

: M

AILBOX

PTIONS

DIT

: C

ALL

OUTING

: [C

- Uncheck (disable) this option.

✔

By default, the Welcome Message and Instruction Menu are enabled.

Step 8

To change the amount of time Automated Attendant callers have to dial options:

8.1

See

for more.

8.2

USTOMIZE

: M

AILBOX

PTIONS

DIT

: C

ALL

OUTING

: [C

- Enter the new timeout duration (0-99 seconds).

✔

By default, Automated Attendant callers have 5 seconds to dial commands.

8.3

THE

CALLER

WAITS

TOO

LONG

DIAL

- When the associated Dial Action Table has a Timeout action programmed, the caller routes

to that destination.

- When the associated Dial Action Table does not have a Timeout action programmed, the

Instruction Menu repeats.

Step 9

To enter a Department Name for a Call Routing Mailbox:

9.1

USTOMIZE

: M

AILBOX

PTIONS

DIT

: C

ALL

OUTING

: [G

- Enter the Department Name. This information appears on the

Distribution List (

page 495

)

and

Mailbox Options

(page 497) reports.

✔

By default, there is no

Department

entry.

Step 10

Optionally review the following reports:

Dial Action Table Default Assignments

Mailbox Number

Dial Action Table

810

811, 812, 821, 822,

831, 832, 841, 842

813, 814, 823, 824,

833, 834, 843, 844

Summary of Contents for UX5000













































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands

NEC UX5000, Manual

Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands