NEC UX5000 Manual Download

Page: 181 / 588

Instruction Menu

UX Mail Manual

Chapter 2: Features

◆

163

Programming

Step 1

To turn off the default Instruction Menu (and Welcome Message):

1.1

USTOMIZE

: M

AILBOX

PTIONS

DIT

: C

ALL

OUTING

: [C

- Use this option to enable (Yes) or disable (No) the default Instruction Menu and Welcome

Message for a Call Routing Mailbox.

- If

enabled

and the Instruction Menu and Welcome Message are not recorded, an Auto-

mated Attendant caller hears the default recordings.

- If

disabled

and the Instruction Menu and Welcome Message are not recorded, the caller

hears silence.

✔

By default, this option is disabled (No).

Operation

Recording an Instruction Menu Message for a Call Routing Mailbox

(If you don’t see a Soft Key, press

More>

until it appears.)

Log onto System Administrator’s mailbox (301).

[Admin]

Access the System Administrator options.

• Alternately dial

(72).

[Annc]

Select the Instruction Menu Message options.

• Alternately dial

(4).

Enter the Call Routing Mailbox number.

[Lstn]

Listen to current Instruction Menu Message.

• Alternately dial

(5).

[Pause]

Pause listening.

• Alternately dial *.

[Resume]

Resume listening.

• Alternately dial *.

[Erase]

Erase the currently recorded message.

• Alternately dial

(3).

[Exit]

Exit the listen mode.

• Alternately dial

N/A

Backup a few seconds.

• Dial

(2).

N/A

Backup to beginning.

• Dial

(22).

N/A

Go forward.

• Dial

(4).

N/A

Turn volume up.

• Dial

(88).

N/A

Turn volume down.

• Dial

(83).

N/A

Return volume to normal.

• Dial

(86).

Summary of Contents for UX5000













































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands

NEC UX5000, Manual

Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands