NEC UX5000 Manual Download

Page: 230 / 588

Message Notification

212

◆

Chapter 2: Features

UX Mail Manual

Message Notification For Subscriber Mailboxes

Step 1

Enable Message Notification for the Subscriber Mailbox.

1.1

USTOMIZE

: M

AILBOX

PTIONS

DIT

: S

UBSCRIBER

- Once you enable Message Notification in this option, the subscriber must log onto their

mailbox and use the

options to activate Message Notification.

✔

By default, this option is enabled (Yes).

Step 2

Allow or prevent the mailbox user from entering local Message Notification numbers.

2.1

USTOMIZE

: M

AILBOX

PTIONS

DIT

: S

UBSCRIBER

- Local numbers are 5-8 digits long, including 1-800-XXX-XXXX, 1-877-XXX-XXXX, and

1-888-XXX-XXXX.

✔

By default, this option is enabled (Yes).

Step 3

Allow or prevent the mailbox user from entering long distance Message Notification numbers.

3.1

USTOMIZE

: M

AILBOX

PTIONS

DIT

: S

UBSCRIBER

- Long distance numbers are more than 8 digits long. The choices are

(long distance

numbers prevented),

Yes

(long distance numbers allowed), and

Some

(only area codes

included in the

Area Code Entry

option below are allowed).

✔

By default, this option is

(long distance numbers prevented).

Step 4

If the mailbox has some area codes allowed in the previous step, enter the list of codes that
can be dialed.

4.1

USTOMIZE

: M

AILBOX

PTIONS

DIT

: S

UBSCRIBER

- You can enter up to 4 area codes.

✔

By default, this option is

(no area codes entered).

Step 5

Optionally enter the Message Notification callout number from the UX Mail Administrator.

5.1

USTOMIZE

: M

AILBOX

PTIONS

DIT

: S

UBSCRIBER

- This setting overrides any numbers entered using the

options, and visa versa.

- You can enter up to 3 numbers (Indexes 1-3). The subscriber activates one of the 3 numbers

- If entering a digital pager number, append the number with several pauses (P).

✔

There are no local or long distance numbers entered by default.

Step 6

Specify the type of call for the number entered in the previous step.

6.1

USTOMIZE

: M

AILBOX

PTIONS

DIT

: S

UBSCRIBER

- Specify internal (an internal 3-4 digit destination), local or long distance.
- This setting overrides the setting the system normally makes based on the number of digits

in the callout number. For example, you can make 203-926-5400 a local callout.

✔

Since there are no local or long distance calls entered by default, the default for this option
is

Internal

Summary of Contents for UX5000













































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands

NEC UX5000, Manual

Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands