5.4.5
Template Display Mode
The Template display mode allows you to switch between Templates.
The Template display mode allows you to switch between Templates.
On the left display, you find the same general information about the Template, Knob Page and
Pad Page currently loaded.
On the right display, you see the list of your Templates, as defined in the Inspector’s
Tem-
plates
pane.
1.
Use Button 5 and 6 above the up and down arrows to scroll through the list and find the
Template you wish to load next. You can also turn Knob 5.
2.
When you have it, press Button 8 (“
LOAD
”) to load the selected Template.
Like for the Knob Pages, this functionality is already available in many ways: in the Controller
Editor you can use the Template list (in the Inspector’s
Templates
pane), and on the MA-
SCHINE controller you can press SHIFT + Page buttons. The Template display mode allows
you a greater control over the Template selection from your controller though, for the reasons
explained as those explained in the previous section for the Knob Pages.
5.4.6
Monitor Display Mode
The Monitor display mode provides you with useful information about the MIDI data sent by
your MASCHINE controller.
The Monitor display mode provides information about the MIDI data sent by your MASCHINE controller.
Using Your MASCHINE Controller
The Displays
CONTROLLER EDITOR - Manual - 67
Summary of Contents for komplete kontrol s series
Page 1: ......
