The Controller depicted in the Hardware area corresponds to the device selected in the Device
menu located in the Application Control Bar (see above).
►
Click an assignable control element in the Hardware area to edit its assignment.
Compared to your real NI controller, the Hardware area holds a few additional graphical ele-
ments:
▪
Every control element that can be assigned to a MIDI message comes with a Label Field
which displays a name (describing by default its current assignment).
Pairs of mini buttons in the Hardware area: If mini buttons are not selected when you
click them, click their Label Field instead!
▪
A red Selection Frame highlights the selected control element(s).
▪
An orange Page (or Knob Page) menu allows you to select a particular Page (or Knob Page)
of assignments. The Page (or Knob Page) area, denoted by an orange frame, holds the con-
trol elements affected by the Page (or Knob Page) selection in the menu. Please refer to
section
for more information on this.
The Page feature is not available on the TRAKTOR KONTROL S2.
▪
MASCHINE controllers only: If the Pad Page feature is activated, an additional blue Pad
Page menu allows you to select a particular page of assignments for the pads. The blue
frame highlights the Pad Page area, which holds the control elements included in the Pad
Pages — namely the pads. Please refer to section
4.3.3, Pad Pages (MASCHINE Control-
▪
MASCHINE STUDIO only: If the I/O and Level Page feature is activated, an additional red
I/O and Level Page menu allows you to select a particular assignment for the Level knob (in
the Master section of your controller). The red frame surrounds the control elements in-
volved in the I/O and Level Pages. Please refer to section
4.3.4, I/O and Level Pages (MA-
for more information on this.
Basic Concepts
Overview of the User Interface
CONTROLLER EDITOR - Manual - 40
Summary of Contents for komplete kontrol s series
Page 1: ......
