The assignment parameters for the selected Key Zone(s) are available in the
Assign
pane
of the Inspector. These parameters are described in detail in section
.
Resizing Key Zones
►
To resize a Key Zone, click its lower or upper border and drag your mouse horizontally.
When resizing Key Zones, please note the following:
▪
Clicking a border of a Key Zone cancels any previous selection.
▪
The lower border of the leftmost Key Zone as well as the upper border of the rightmost Key
Zone are fixed and cannot be dragged.
▪
Since Key Zones cannot overlap, dragging the border of a Key Zone simultaneously resizes
the neighboring Key Zone accordingly so that both Key Zones stay “in contact.”
▪
You cannot resize a Key Zone to less than one key — this is also true for the neighboring
Key Zone that is simultaneously resized.
Adding or Deleting Key Zones
You can add a new Key Zone at the right end of the keybed:
►
To add a new Key Zone at the right of the existing Key Zones, click the
Add
button at the
bottom of the Keybed area:
→
The rightmost Key Zone is shrunk to half of its size and the remaining keys are included
into a new Key Zone.
If the rightmost Key Zone is only one key wide, it is moved one key to the left and a new one-
key-wide Key Zone is created at its right.
If you already have 16 Key Zones, the
Add
button is grayed out and disabled.
Alternatively you can split any existing Key Zone into two distinct Key Zones at the desired key:
Using Your KOMPLETE KONTROL S-SERIES Keyboard
Defining Key Zones
CONTROLLER EDITOR - Manual - 245
Summary of Contents for komplete kontrol s series
Page 1: ......
