▪
The Group buttons, labeled A to H, are not assignable if you use the Pad Page feature —
they’re used for selecting Pad Pages, see previous section. If you deactivate the Pad Pages,
the Group buttons are freely assignable like any other.
You can also split the controls of your controller between MIDI mode and MASCHINE
mode in order to control a MASCHINE plug-in instance while sending MIDI messages to
the host with the transport controls! See
for more information.
Assignment Parameters
The following table summarizes where to find all assignment details for each type of control
element on your controller:
Type of Control Element
Assignment Parameters
Buttons
25.6.2, Assignments for Buttons
Pads – Hit action
25.6.4, Assignments for the Pads – Hit Action
Pads – Press action
25.6.6, Assignments for the Pads – Press Action
Knobs
25.6.8, Assignments for Analog Encoders
5.3
Visual Feedback on Your Controller
The fast bidirectional communication between your MASCHINE controller and the Hardware
Service on the software side allows status indications on your controller to be made in real
time.
Your MASCHINE controller provides you visual feedback in various ways:
▪
All buttons and pads are equipped with LEDs that inform you about the assignment state
of the control element at any time.
▪
The displays show you additional information about the assignments.
5.3.1
Buttons
The LEDs below each button can have three states: off, dimmed and bright. Their lighting be-
havior depends on the type and state of the control element.
Using Your MASCHINE Controller
Visual Feedback on Your Controller
CONTROLLER EDITOR - Manual - 61
Summary of Contents for komplete kontrol s series
Page 1: ......
