The menu contains two new factory Templates.
Template Properties
There is no Template Properties area for the TRAKTOR KONTROL X1/X1 MK2/F1/S2/
S2 MK2/D2/S5/S8/Z1/Z2,and KOMPLETE KONTROL S-SERIES.
The Template Properties area contains settings for the Template selected in the Template list:
The Template Properties on the
Templates
pane (here for the MASCHINE controller).
Depending on the selected controller, you will find in the Template Properties up to three ele-
ments: the
Pad Velocity Curve
menu, the
MIDI Port
menu and the
Host Transport Control
check box. These elements are described in the following paragraphs.
Pad Velocity Curve menu (MASCHINE Controller Family Only Except MASCHINE JAM)
The
Pad Velocity Curve
menu allows you to choose from a list of seven velocity curves that af-
fect the behavior of the pads on your controller. A velocity curve defines how the pressure on
the pads will be translated into velocity values. In the
Pad Velocity Curve
menu, you can
choose between three soft, three hard and one linear curve. The soft curves are boosting lower
pressure values and damping higher pressure values (logarithmic response), the hard curves
are damping lower pressure values and boosting higher pressure values (exponential response).
The linear curve will translate pressure values into velocity values proportionally.
MIDI Port menu
For the NI controllers equipped with a MIDI output socket, the
MIDI Port
menu allows you to
specify whether you want to send the MIDI messages to the internal (virtual) MIDI port or to
the external (physical) MIDI port of your NI controller. When you click this menu, you see two
options:
Reference
The Inspector
CONTROLLER EDITOR - Manual - 299
Summary of Contents for komplete kontrol s series
Page 1: ......
