manualshive.com logo in svg

Native Instruments komplete kontrol s series, Manual

Share
Download
Native Instruments komplete kontrol s series Manual Download Page 293

Page Areas

The Page area holds all control elements included in a Page (here the Knob Page area on the MASCHINE STUDIO control-
ler).

Inside the Hardware area, one or more colored frames highlight some of the control elements.
These frames define the various page areas, which hold all control elements included in the
corresponding paging system:

▪

TRAKTOR  controller  family,  KOMPLETE  KONTROL  S-SERIES:  The  unique  orange  frame
indicates the area of the Pages.

▪

MASCHINE (MK2), MASCHINE MIKRO (MK2), MASCHINE STUDIO: The following frames
are visible (if enabled):

◦

Orange frame: Knob Pages.

◦

Blue frame: Pad Pages.

◦

Red frame (MASCHINE STUDIO only): I/O and Level Pages.

◦

Violet frame (MASCHINE STUDIO only): Jog Wheel Pages.

▪

MASCHINE JAM: The following frames are visible (if enabled):

◦

Blue frame: Matrix Pages.

◦

Orange frame: Touch Strip Pages.

◦

Red frame: I/O and Level Pages.

Reference

The Hardware Area

 

CONTROLLER EDITOR - Manual - 293

Summary of Contents for komplete kontrol s series



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands