For every control element of the Hardware area that can be assigned to some MIDI message,
you find a Label Field above or below it. This field mirrors the Label Field located in the upper
part of the
Assign
pane in the Inspector, so that you can see all control elements along with
their names.
If no name has been defined yet for a control element, its Label Field displays by default the
MIDI message assigned to that control element.
Like all other assignments properties, these names are of course saved within the Pages and
Templates.
Many of the control elements already have a name on them in the Hardware area: this
name only refers to their original function in their dedicated software (KOMPLETE KON-
TROL, MASCHINE or TRAKTOR.)
Showing/Hiding All Labels
For the MASCHINE STUDIO, MASCHINE JAM, TRAKTOR KONTROL X1 MK2, S2 MK2,
S4 MK2, D2, S5, S8, and Z1, a
Show all labels
check box in the top right corner of the Hard-
ware area allows you to show/hide the labels of all control elements that are not selected. Hid-
ing labels of the other control elements can help you focus on the assignments you are current-
ly working on.
The
Show all labels
check box.
Labels for the selected control elements are always shown.
The
Show all labels
check box is equivalent to the
Toggle Labels
entry in the Application Menu
Bar’s
View
menu (see section
). To enable/disable it, you can also press
[Ctrl] + [L] on your computer keyboard ([Cmd] + [L] on Mac OS X).
Reference
The Hardware Area
CONTROLLER EDITOR - Manual - 291
Summary of Contents for komplete kontrol s series
Page 1: ......
