manualshive.com logo in svg

Native Instruments komplete kontrol s series, Manual

Share
Download
Native Instruments komplete kontrol s series Manual Download Page 91

The three tabs at the top of the display on your MASCHINE MIKRO controller when NAV is hold depressed.

These tabs allow you to select the desired display mode from the three modes available: Tem-

plate, Control, and Setup:

►

To switch to any of the display modes, hold the NAV button and press the desired F1–F3
button above the display.

At any time, you can press the NAV button again and switch to another display mode.

7.4.2

Control Display Mode

 

The Control display mode is probably the one you will use the most.

►

To switch to the Control display mode, press NAV + F2.

In this mode, the display shows the assignments for the currently loaded Knob Page, with its
three button assignments on the top row for the F1–F3 buttons, and its Control encoder as-
signment on the bottom row:

The Control display mode mirrors the loaded Knob Page.

In this mode, the F1–F3 buttons and the Control encoder trigger their assigned MIDI messag-
es.

Using Your MASCHINE MIKRO Controller

The Display

 

CONTROLLER EDITOR - Manual - 91

Summary of Contents for komplete kontrol s series



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands