▪
HSB mode: This mode is only available when the pad’s state is controlled via MIDI feed-
back (see below). In HSB mode, you can precisely define from within your MIDI target
which color the pad will use.
▪
Indexed mode: This mode is only available when the pad’s state is controlled via MIDI
feedback (see below). In Indexed mode, you can precisely define from within your MIDI tar-
get which color the pad will use.
Controlling the Button/Pad State
The On/Off state of each button or pad can be controlled in two ways — internally via your ac-
tions on the button/pad, or remotely via MIDI feedback:
▪
In Toggle mode, both controls are enabled: both your actions on the button/pad and the
possibly incoming MIDI messages are taken into account to update the button/pad and
LED state.
▪
In Trigger, Gate, and Increment mode, you can choose which control mode (internal or re-
mote via MIDI) you want to use. This is done via the
LED On
menu in the
Assign
pane of
the Inspector.
For more information on the button modes,
LED On
menu, and MIDI feedback mode,
see
25.6.2, Assignments for Buttons
Buttons and Pads in the Displays
In addition to the LED indications, on each Deck Unit the assignments for the FX buttons, Per-
formance buttons, and pads are shown within the displays in Control display mode.
For more information on the displays of your TRAKTOR KONTROL S5, see section
17.3.2 LOOP Encoder
On each Deck Unit, the LOOP encoder is equipped with a LED that indicates you the state of
the encoder’s Push action. The LED’s behavior is the same as that of buttons (see section
Using Your TRAKTOR KONTROL S5
Visual Feedback on Your Controller
CONTROLLER EDITOR - Manual - 185
Summary of Contents for komplete kontrol s series
Page 1: ......
