manualshive.com logo in svg

Native Instruments komplete kontrol s series, Manual

Share
Download
Native Instruments komplete kontrol s series Manual Download Page 189

►

To adjust the red, blue or green level of a particular display, turn the Performance knob 1
(

RED

), 2 (

GREEN

) or 3 (

BLUE

) beneath that display.

→

The color levels of that display are adjusted accordingly.

►

To adjust the brightness of both displays, turn the Performance knob 4 beneath any dis-
play.

→

The brightness applies to both displays simultaneously. The 

BRIGHTNESS

 value above Per-

formance knob 4 is updated in both displays accordingly.

You can also adjust the brightness of the displays in the Controller Editor by going to

File > Preferences > Traktor Kontrol S5

. See section 

↑

25.2.2, Controller Pages

 for more

information.

You can cancel your adjustments at any time by doing the following:

Using Your TRAKTOR KONTROL S5

The Displays

 

CONTROLLER EDITOR - Manual - 189

Summary of Contents for komplete kontrol s series



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands