▪
Inc (Increment): In Increment mode, each action on the control element increases/decreas-
es the parameter value. Two numeric fields
Range From
and
To
define the min and max
values of the interval, respectively, each of them going from 0 to 127 (by default, 0 for the
min and 127 for the max). Below, another numeric field called
Step
defines the increment
to add (or to subtract if negative) each time that you press the button (it goes from -127 to
127, with 1 as default value). Finally, the
Wrap
button allows you to “cycle” the interval: If
this button is activated, once the parameter reaches one of its limits, it jumps to the other
one upon the next time you hit the control element. If the
Wrap
button is deactivated, the
message sent upon the next hit keeps the maximal (or minimal) value for the parameter.
If the values set in the
Range From
and
Range To
fields are equal, they turn red to indi-
cate a possible mistake when entering the values!
LED On Menu
The
LED On
menu.
For all control elements with LEDs and in Trigger, Gate, or Increment mode, a
LED On
menu
allows you to choose from two LED lighting behaviors:
▪
For MIDI In
: Selects the MIDI feedback mode. In this mode, the LED is controlled by the
MIDI target via a MIDI feedback channel. The MIDI target sends a MIDI message back to
the controller to define the LED’s state. This control mode notably allows the button LED to
be always reflecting the current state of the target’s parameter, even if you changed this
parameter via another way (e.g. with your mouse or via a keyboard shortcut in the target
software). For this to work, you have to define in your target the MIDI message to be sent
accordingly.
▪
For MIDI Out
: Selects the internal control mode. In this mode, the LED reacts to your ac-
tions on the button.
When the control element is set to Toggle mode, the
LED On
menu is not available be-
cause both behaviors are used — the LED reacts both to your actions and to the (possi-
bly) incoming MIDI feedback messages.
Reference
MIDI Message Parameters
CONTROLLER EDITOR - Manual - 315
Summary of Contents for komplete kontrol s series
Page 1: ......
