and the Inspector’s
Assign
pane (where you can see or modify the corresponding assign-
ments) — instead, as soon as you actuate the desired control element on your NI control-
ler, it is automatically selected in the Controller Editor (the red Selection Frame focuses on
it) and its assignment is automatically shown in the
Assign
pane of the Inspector. You can
now focus on this
Assign
pane on your computer screen, making all selections from your
hardware. This can be for example a very efficient way to work on large series of assign-
ments. Moreover, this ensures you that you’re really dealing with the control element you
plan to use for that particular task.
For devices split into different sections in the Hardware area (and providing an Overview
to select a particular section for displaying), the
Touch Select
option only works in the
section currently displayed in the Hardware area.
For control elements allowing multiple actions (e.g., Push and Turn), the
Touch Select
option even allows to select the tab in the
Assign
pane corresponding to the particular
action (e.g., turning) you apply to the control element.
KOMPLETE KONTROL S-SERIES: The
Touch Select
option has no effect on the KOM-
PLETE KONTROL S-SERIES devices.
▪
Wrap Template and Page Lists: If activated, the selection jumps to the other end of the Tem-
plate or Page list whenever you press the Up (or Down) arrow key on your computer key-
board or the corresponding shortcuts on your controller while the first (or last) entry is se-
lected in the list — in other terms, you “loop” the lists by joining both ends.
25.2.2 Controller Pages
The controller pages of the
Preferences
window allow you to adjust the settings for the NI con-
trollers currently connected to your computer:
Reference
The Preferences Window
CONTROLLER EDITOR - Manual - 264
Summary of Contents for komplete kontrol s series
Page 1: ......
