21.3.1 Buttons
On your TRAKTOR KONTROL S2, all buttons are equipped with LEDs that inform you about
the assignment state of the button at any time. The LEDs below each control element can have
three states: off, dimmed and bright. Their lighting behavior depends on the state of the con-
trol element.
The following table indicates you the possible states for the LEDs:
Button State
LED State
Not assigned
Off
Assigned – Off state
Dimmed
Assigned – On state
Bright
For buttons in Increment mode, the Off state corresponds to the zero value, while the
On state corresponds to a value greater than zero.
Controlling the Button State
The state of each button can be controlled in two ways — internally via your actions on the
button, or remotely via MIDI feedback:
▪
In Toggle mode, both controls are enabled: both your actions on the button and the possi-
bly incoming MIDI messages are taken into account to update the button state.
▪
In Trigger, Gate, and Increment mode, you can choose which control mode you want to use
via the
LED On
menu located in the
Assign
pane of the Inspector.
For more information on the button modes,
LED On
menu, and MIDI feedback mode,
see
25.6.2, Assignments for Buttons
Adjusting the LED Brightness
You can adjust the LED brightness for both On and Off button states in
File > Preferences >
Traktor Kontrol S2
(see
for more information on the Preferen-
ces window).
Using Your TRAKTOR KONTROL S2
Visual Feedback on Your Controller
CONTROLLER EDITOR - Manual - 230
Summary of Contents for komplete kontrol s series
Page 1: ......
