The following paragraphs describe how the LED under each button keeps you informed on the
button states.
Single-Color Buttons
For all buttons except the Scene, matrix, and Group buttons, the LEDs can have three states:
off, dimmed and bright. All are white except for the
PLAY
button (green), the
REC
button
(red), and the
IN1
button (blue). The LED states directly indicate the button states:
Button State
LED State
Not assigned
Off
Assigned – Off state
Dimmed
Assigned – On state
Bright
For buttons in Increment mode, the Off state corresponds to the zero value, while the
On state corresponds to a value greater than zero. See section
for more information on the various button modes.
Multicolor Buttons
All buttons in the 8x8 matrix are equipped with RGB LEDs. This by far extends the monitoring
possibilities of these control elements. Multicolor buttons offer you three Color modes:
▪
Single mode: You can choose a color that will be used bright and dimmed for the On and
Off states, respectively. In this mode, the button’s lighting behaves like that of single-color
buttons (see table above).
▪
Dual mode: You can choose a color for the On state and another color for the Off state. Both
colors will be used at full brightness.
▪
Indexed mode: This mode is only available when the button state is controlled via MIDI
feedback (
LED On
menu set to
For MIDI In
, see below). In Indexed mode, you can precise-
ly define from within your MIDI target which color the button will use.
Using Your MASCHINE JAM Controller
Visual Feedback on Your Controller
CONTROLLER EDITOR - Manual - 132
Summary of Contents for komplete kontrol s series
Page 1: ......
