Native Instruments komplete kontrol s series Manual Download Page 266

Page: 266 / 338

25.2.2.1 Settings for the MASCHINE and MASCHINE MK2 Controllers

For the MASCHINE and MASCHINE MK2 controllers, the settings are exactly the same as

those available on the displays of your controller in Settings display mode. As a reminder,

these settings are the following:

Section/control

Description

Pads section

Sensitivity

slider

Changes the sensitivity of the pads.

Display section

Brightness

slider

Changes the backlight of the displays.

Contrast left

slider

Sets the contrast for the left display.

Contrast right

slider

Sets the contrast for the right display.

Reference

The Preferences Window

CONTROLLER EDITOR - Manual - 266

Summary of Contents for komplete kontrol s series



















































































































































































































































































































































Search results

Summary of Contents for komplete kontrol s series

Reviews:

Brands by name

Popular brands

Native Instruments komplete kontrol s series, Manual

Search results

Summary of Contents for komplete kontrol s series

Reviews:

Brands by name

Popular brands