Below, a message reminds you that you can switch to another Template simply by pressing the
Page buttons, since you are already holding SHIFT (see
).
9.4.2
Settings Display Mode
The Settings display mode allows you to adjust a few hardware settings and provides informa-
tion about your MASCHINE STUDIO controller.
The Settings display mode provides access to parameters for your MASCHINE STUDIO controller.
Left Display
The settings are grouped in the left display. This screen gives also an overview of the selected
Pages. The available parameters are set out as follows:
▪
Knob 1 controls the pad sensitivity.
▪
Knob 2 controls the touch sensitivity of Knobs 1–8. At low sensitivity values, you will need to
apply a stronger pressure on Knobs 1–8 to send the MIDI message. At high sensitivity val-
ues, a softer pressure on the knobs will already send the MIDI message.
For the touch sensitivity of Knobs 1–8, the value display above Knob 2 provides an additional
visual feedback that helps you quickly find the sensitivity that best fits your needs:
On the left, your touch is not detected; on the right, it is detected!
Using Your MASCHINE STUDIO Controller
The Displays
CONTROLLER EDITOR - Manual - 119
Summary of Contents for komplete kontrol s series
Page 1: ......
