Button State
LED State
Not assigned
Off
Assigned – Off state
Dimmed
Assigned – On state
Bright
For buttons in Increment mode, the Off state corresponds to the zero value, while the
On state corresponds to a value greater than zero.
Controlling the Button State
The state of each button can be controlled in two ways — internally via your actions on the
button, or remotely via MIDI feedback:
▪
In Toggle mode, both controls are enabled: both your actions on the button and the possi-
bly incoming MIDI messages are taken into account to update the button state.
▪
In Trigger, Gate, and Increment mode, you can choose which control mode you want to use
via the
LED On
menu located in the
Assign
pane of the Inspector.
For more information on the button modes,
LED On
menu, and MIDI feedback mode,
see
25.6.2, Assignments for Buttons
Adjusting the LED Brightness
You can adjust the LED brightness for both On and Off button states in
File > Preferences >
Traktor Kontrol X1 - x
(see
for more information on the Prefer-
ences window).
11.4 Using Two or More TRAKTOR KONTROL X1 Units
You can use up to four TRAKTOR KONTROL X1 units simultaneously. This allows you to fur-
ther extend the number of parameters you can control in your target(s). For more information
on how to set up more than one TRAKTOR KONTROL X1 for use with the same computer,
please refer to chapter
24, Using Two or More Units of the Same Type
.
Using Your TRAKTOR KONTROL X1
Using Two or More TRAKTOR KONTROL X1 Units
CONTROLLER EDITOR - Manual - 139
Summary of Contents for komplete kontrol s series
Page 1: ......
