17.3.1 Buttons and Pads
All buttons and pads are equipped with single-color or multicolor LEDs. Basically, each button
or pad on your controller can have three states:
▪
Not assigned.
▪
Assigned, in Off state.
▪
Assigned, in On state.
Single-Color Buttons
For all buttons, the LEDs can have three states: off, dimmed and bright. The LED states direct-
ly indicate the button states:
Button State
LED State
Not assigned
Off
Assigned – Off state
Dimmed
Assigned – On state
Bright
For buttons in Increment mode, the Off state corresponds to the zero value, while the
On state corresponds to a value greater than zero. See section
for more information on the various button modes.
Multicolor Pads
The sixteen pads of your controller are equipped with RGB LEDs. This by far extends the moni-
toring possibilities of these control elements. The pads offer you three Color modes:
▪
Single mode: You can choose a color that will be used bright and dimmed for the On and
Off states, respectively. In this mode, the pad’s lighting behaves like that of single-color
buttons (see above) except that you can choose the color.
▪
Dual mode: You can choose a color for the On state and another color for the Off state.
Both colors will be used at full brightness.
Using Your TRAKTOR KONTROL S5
Visual Feedback on Your Controller
CONTROLLER EDITOR - Manual - 184
Summary of Contents for komplete kontrol s series
Page 1: ......
