NAC Image Technology MC-529, User Manual

Page: 47 / 180

(00235) 2-19
2.8.5 Frame Jumping
During the STOP mode, use TRIG , REV , FWD , or turn the dial to the right ( ), or turn the
dial to the left ( ) to jump to a particular frame. (Figures 2-30,31) Frames for jumping and the operations
are shown in Table 2-6.
Table 2-6 Frame Jumping
Frames for Jumping Operation
1st frame
Press TRIG while pressing
REV .
Press TRIG while turning the dial
to the left ( ).
Trigger frame
Press TRIG .
Last frame
Press TRIG while pressing
FWD .
Press TRIG while turning the dial
to the right ( ).
Event frame
Press TRIG .
●
With burst recorded images, press TRIG to sequentially jump to the top frame where the burst
trigger was input.
●
With multi trigger recorded images, press TRIG to sequentially jump to the trigger frame for each
block.
A summary of the J-PAD3 operations for frame jumping is as follows (Figures 2-30,31).
STOP mode
Jump to the
last frame
Jump to the
trigger or event frame
Jump to the
1st frame
Figure 2-30 Frame Jumping Using the J-PAD3
STOP mode
Jump to the
last frame
Jump to the
trigger or event frame
Jump to the
1st frame
Figure 2-31 Frame Jumping Using the J-PAD3 (Using the Dial)