NAC Image Technology MC-529, User Manual

Page: 132 / 180

(00233) 5-14
5.2.13 Auto View Function Settings (AUTOVIEW)
The auto view functions can be set.
The auto view function automatically switches from REC mode to VIEW mode once recording has been
completed.
Once memory segmented recording has been completed, that memory segment (where recording has
been completed) automatically switches to the VIEW mode. At this point, press VIEW/ARM to switch to
the next memory segment and switch to the ARM mode.
Auto view cannot be used for a recording method in the AUTO mode or the LOOP mode. If the
recording method is set to the AUTO mode or LOOP mode, the auto view function will not function.
1) While in the STOP mode, press MENU to display the
TOP MENU.
2) Use the arrows to select "SYS MENU" from the TOP
MENU and press SET to display the SYS MENU.
3) Use the arrows to select "AUTOVIEW" from the SYS
MENU (Figure 5-21).
4) Use the arrows to select the auto view function.
OFF Auto view function OFF
AUTO The auto view function is repeated until the final memory segment
(switches to memory segments where recording has been completed, cannot
overwrite images)
At this time, the warning message of the ban on a substitute is displayed on a video display screen.
(Figure 5-22)
LOOP The auto view function is repeated until stopped (press STOP )
(switches to memory segments where recording has been completed, cannot
overwrite images)
(After recording the last memory segment, it returns to the first memory segment)
Figure 5-22 Warning message
Warning message
Figure 5-21 AUTOVIEW